Fire king file cabinet repair

Warranty service is available by contacting your retail seller, or by contacting Fire King International Inc. Fire King reserves the right to have its representative inspect any product or part to honor any claim, and to receive a purchase receipt or other proof of original purchase before warranty service is performed.

This warranty is limited to the terms stated herein. All expressed and implied warranties including the warranties of merchantability and fitness for a particular purpose are excluded, except as stated above. Fire King disclaims all liabilities for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may have other rights as well, which will vary from state to state. If a mechanical or operable part of the FireKing Media Vault malfunctions or breaks down during normal use, FireKing, will at its option, repair or replace such part FREE for three 3 years from the date of purchase. FireKing reserves the right to have a representative inspect any product or part to honor any claim, and to receive a purchase receipt or other proof of original purchase before warranty service is performed.

FireKing disclaims all liabilities for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. Keylock stud loose Medico keylocks :. Check the lock stud on the back of the keylock. If the stud is loose, tighten with a flat screwdriver. Roll pin hanging on eccentric HG Series keylocks :. Tap roll pin in so that it clears the eccentric but still catches on the drawer head; line so that the key lock will not pull through the head.

Over filling of drawers can cause the drawers to bulge and the sidecatch to rub against the side of the cabinet and hang in the up or bypass position. Follow the side catch adjustment procedure to adjust the side catch up. Lock rod binding; keylock moves in and out freely but cabinet will not unlock:. File will need to be opened following drill point instructions.

Note: All 3 and 4 drawer models will have a ball bearing roller attached to the lock rod on each drawer. It may be necessary to bend the drawer body side rails with the bearings before the cabinet will open. Follow lock rod installation instructions to repair the top of the cabinet. Keylock will not move in the black encasement:. FireKing File Troubleshooting The following is a list of problems along with likely causes and associated solutions.

Keylock Will Not Stay In Loose material in the black encasement: Open lock drawer and look inside the backside of the encasement for any loose material. Ensure the keylock moves freely in the encasement. Drawer s do not close properly: Make sure all drawers are closed and that there is not anything in the drawerhead track or behind the drawer body. Make sure the drawer s are in the right opening.

Each drawer is numbered on the right hand side with the lock drawer being 1. Make sure drawers are properly aligned inside the opeing. Loosen the two 8 screws located in the bottom center of the drawer body, and adjust the drawer side to side, then re-tighten the screws.

Side catch es not adjusted properly: Close all of the drawers and holding keylock in the locked poisition, try to open all of the drawers. Keylock stud loose Medico keylocks : Check the lock stud on the back of the keylock. Roll pin hanging on eccentric HG Series keylocks : Tap roll pin in so that it clears the eccentric but still catches on the drawer head; line so that the key lock will not pull through the head.