Gerkin windows rhino series

Brass, pewter, or oil rubbed bronze hardware and keyed cylinder locks or painted 2 point locks are available options. Our sash operates on adjustable heavy-duty, stainless steel ball bearing rollers. Atrium Swing Doors. These doors were built for style but with an engineered design built for energy-efficient performance.

All doors come with stainless steel hardware but the series has a full height gear hinges that distributes the load stress uniformly along the full length of the door panel which diffuses the wear and tear and eliminates sagging and hinge bind. It has a standard 3 point locking system with a dead bolt for maximum security. All doors are weather stripped and a rain shed design for maximum protection from the elements.

These come with matching sliding screens made of extruded aluminum and include adjustable steel ball bearings rollers for an effortless operation. The hardware on all of these doors is a contemporary Satin Nickel finish hardware. Gerkin offers bay windows for large and small spaces. Gerkin comfort series bay windows come with natural oak or birch head and seat boards. Bay windows can have three windows in the opening with any of them opening and Gerkin can offer a customer appearance.

Just like the bay windows, Gerkin Bow windows come with natural oak or birh head and seat boards. Bow windows give a unique look with a traditional appearance and smooth lines.

Bow windows can have four or more windows in the opening and offer several different projections for a customer appearance. Gerkin meets the LEED requirement that building materials supplied are within miles of any project site. Louis are within miles from its plants in South Sioux, Nebraska. Gerkin windows incorporate recovered or recycled materials.

Due to their high energy efficiency, they also qualify for tax credits which are extended through as an incentive for energy-efficient home improvements. The lead time on orders is also a bit longer than some of the other companies we deal with….

Read more Gerkin windows reviews. Have a question about your project? Email us - we've got answers to help you find a solid performing window and the best installation for your money! All Rights Reserved.

Enter Your Zip Code:. At this point, the balance can be removed. Install the new balance by reversing the above process. Insert the balance shoe into the balance cavity with the open end of the shoe facing the interior and the top of the balance at a 90 degree angle to the balance cavity. Then pivot the balance up and pull into position so that the balance screw can be reused in the existing hole.

Reinstall the sash into the balances by keeping the sash at a 90 degree angle to the window. Install the sash pivot bar into one balance shoe at a time. Raise or lower that balance until the sash pivot bar on the opposite side can be engaged into the balance shoe.

Once engaged, bring the balances to level before tilting the sash up into place. Slide the sash up and down a few times to make sure it moves freely. The screen can be removed by first raising the lower sash about 3". Using the slide latches at the top of the sash, disengage the latches from the jambs and tilt in about 30 degrees. Rest the tilted sash against your body and reach for the top of the screen.

Pull down on the clear plastic latches that are engaged into the window at the top of the screen. Once unlatched, pull the top of the screen inward and then pull out between the tilted sash and window frame. Screen installation is exactly reverse of this procedure.

To do so, remove both sashes by opening each 4" or more and then tilt in. Remove the balance cover if the lower sash balance needs replacing. Pull the top of the balance toward the opposite side of the window until it is at a 90 degree angle. Reinstall the balance cover if previously removed. Snap in one side first and then the opposite side.

Screen removal can be done by raising the lower sash fully, then pivot the two screen latches away from their connection at the window frame. Pivot the bottom part of the screen out a few inches and then pull down. This will disengage the screen from the head of the window. One hand should be at the bottom of the screen and the other hand at the center bar in the screen. Do not pull on the center bar, just use it to support the screen. Once removed, turn perpendicular to the window and bring through the lower portion of the window at a 45 degree angle.

To reinstall the screen, lift the lower sash fully. Then, at a 45 degree angle stick, the screen out through the opening with the top of the screen first. Bring the top of the screen into the head of the window by laying the screen flat to the window frame a few inches short of the top.

Then slide the screen up until the screen flange engages into the built in kerf at the head of the window. It may be helpful to lower the top sash enough to grab the screen near the top to help guide it into place. Once the head is engaged, pivot the lower portion of the screen into place and swing the screen latches into the window frame so that they overlap the vinyl flange. The rollers at the bottom of the operating sash should be checked to make sure they roll smoothly.

If the rollers are worn out, they can be easily replaced with new Gerkin rollers. To replace the rollers, use a flat screwdriver to pry underneath the roller housing. The housing will unsnap and can be pulled out. Replace with a new roller and roller housing by snapping back into place.

Horizontal sliders have external weep covers. If one is damaged or missing, replace by prying the existing weep cover out with a flat screwdriver.

They are just snapped into place, so removal will be quite simple. Snap in a new weep cover with the open end facing down. The weather-stripping around your windows is designed to last for many years. Whenever cleaning your windows, you should inspect the weather-stripping to make sure it is not worn or missing.

Your windows have been designed so that the weather-stripping can be replaced. The operating sash on the horizontal slider can be easily removed. Start by sliding the sash to the fully open position. Then lift the sash straight up, clearing the sill track.

If the sash does not lift up, try opening the sash further. There is an anti-lift device in the head of the window, which is a safety feature that prevents entry from the exterior while in the closed and locked position. If the sash isn't opened far enough, the anti-lift device will restrict the sash from being lifted. Once fully open, tilt the lower portion of the sash to the inside and then lower the sash out of the head track of the window.

The screen of the slider is removable from the inside. Open the sash fully. Grab the screen rail and pull it horizontal toward the middle of the window. The screen is a side load screen, so this motion will disengage the screen from the jamb. Pull the disengaged side of the screen toward the inside and pull the screen out of the opening. To reinstall the screen, just reverse these instructions.

Our sliding glass doors are pre-adjusted during production, but in-field adjustments can easily be made by raising or lowering the wheels, which adjust the operating door panel sightlines with the frame.

There is a snap in plug covering the adjustment screw for each wheel at the bottom of the operating door panel.