How to patch a shirt sleeve

Remove any loose thread with the tweezer end of your seam ripper. Ironing can also help to smooth out any leftover marks and punctures from a previous patch. Ironing your garment before sewing will prevent you from sewing over any wrinkles and, therefore, leaving permanent wrinkles in your clothes. Position the patch in the correct place. Make sure your patch is placed correctly before sewing or gluing the patch to the sleeve.

If you are sewing a patch on a military uniform you will have instructions on the specific location of the patch. For example, a Navy striped patch must end 2 inches 51 mm above the cuff on the sleeve. Refer to any instructions you were given to correctly place patches. You can either pin the patch on or use glue tape to iron your patch in place. It is only to hold the patch in place while you sew.

The lack of pins will allow you to sew the patch on without running into any pins. If you ironed the patch on, let it cool before sewing. Sew your patch onto your uniform. You can do this either using a sewing machine or hand stitching. Match the color of the patch's edges or use clear thread.

Go slowly. Depending on where your patch is, sewing may be more difficult. If the patch is higher on the arm, you can use your neck opening to separate the layers of fabric.

Set your machine on a slow setting. If you need to rotate your uniform and patch, raise the foot with the needle still in place. Rotate your garment, then lower the foot.

If hand sewing, take your time so that you can create even spaces between each pass and sew in a straight line. Use a straight stitch on patches. Seal your thread with a knot or on the machine. Not Helpful 3 Helpful Yes, if the shirt is new. This ensures the shirt doesn't shrink after sewing on the patch, causing puckering. Not Helpful 1 Helpful 6. The date that this article was posted on was June 11th, Not Helpful 3 Helpful 8. Cub scout badges that go on the shirt pocket, do you sew through both the pocket and the shirt material which makes the pocket unusable or do I need to hand sew through just the pocket material?

You sew through just the pocket material. It takes some practice to do the hand sewing, but it is possible. Not Helpful 0 Helpful 0. Can a military use a borrowed uniform in the uniform different name not their name instead being a USArmy it is USMarine? This is also why in recent years that Vets and Active Service Members have insisted that when people fake being a vet or active military that the person be charged.

Not Helpful 2 Helpful 4. Iron-on patches always have some sort of adhesive on the back of them, so look for a foggy, semi-transparent backing. Lay the patch flat in your hand and press with your other hand to make sure, though, since the iron-on backing usually gets a little sticky from the heat of your hand.

Not Helpful 2 Helpful 1. Include your email address to get a message when this question is answered. By using this service, some information may be shared with YouTube. If the patch placement area is accessible by sewing machine, you can sew it on with a sewing machine. If your machine uses a top and bottom thread, the top thread should match the edge of the patch where you are sewing.

The bottom thread should be chosen to match the back of the material. Helpful 8 Not Helpful 2. If straight pins leave the patch too wavy for easy sewing, you can staple it temporarily in place and remove the staples after sewing.

Fusible webbing can also be used to "tack" the patch in place temporarily until you can stitch it on a machine. Helpful 6 Not Helpful 3. If it is hard to press the needle through the entire thickness of the patch and uniform, use a thimble to protect your fingers. Helpful 7 Not Helpful 5. It may be easier to use iron-on fusing tape to attach the patch instead of sewing it on see How to attach a patch using iron-on fusing tape for details.

Helpful 3 Not Helpful 1. An ironed and sewn patch looks good for many years and after hundreds of washes. Helpful 4 Not Helpful 2. A glove or leather needle is an excellent needle to use for sewing on a patch.

Helpful 4 Not Helpful 3. Submit a Tip All tip submissions are carefully reviewed before being published. If you rely only on ironing your patch it will, over time, raise up and separate from your garment. Depending what you do while wearing your uniform a patch can get caught on sharp edges and branches.

Sewing reinforces its bond. Helpful 5 Not Helpful 2. Many organizations are now producing patches that are made to be ironed on, so you may want to check for this feature before sewing the patch on by hand.

Helpful 2 Not Helpful 1. You Might Also Like How to. How to. About This Article. Co-authored by:. Co-authors: Updated: December 8, Article Summary X To sew a patch on a uniform by hand, position the patch and hold it in place with pins or fabric tape. Italiano: Cucire una Toppa su un'Uniforme. Bahasa Indonesia: Menjahit Emblem pada Seragam. As the cut thread will fuse to the interfacing underneath, the small hole will be repaired.

Another method you can try is to use hemming tape to mend a tear. Sewing is not necessary for this task. The glue in Hemming tape works like that. You will have to melt the glue to get the fabrics to stick together if you heat it. About us Here at venuszine. With our aim of creating a strong online fashion community full of fashion enthusiasts, we are here with the best and most relevant content for our readers.

Learn all about the positive and negative aspects of different products and apparel that are launched globally through us. Related Articles. You should now have a DIY iron-on patch. Spread the piece of clothing you're patching out on your ironing board with the hole facing up. Take a hot iron set to whatever heat is appropriate for the patch and clothing fabric and iron over the edges of the patch for 30 seconds to a minute, until the fusible web sets and the patch is firmly attached to your clothing.

Now that the patch is ironed in place, you can stitch around the edges without pinning or worrying about fabric stretching and misaligning. If you have a sewing machine, sew with a zigzag stitch around the edges of the patch. Once you get all the way around the edge, overlap the stitching by an inch or so to keep the thread from unravelling. I often just sew all the way around the edge twice. The zigzag stitch helps keep the edge of the patch from fraying or slipping out.

If you're sewing by hand, stitch all the way around the edge. Use small stitches and overlap them if the patch fabric is prone to fraying. Less-disintegrating clothing, more color, and so easy! You can use this same technique to add screenprinted patches or interesting bits of fabric, even if you're not covering over a hole. Sorry this instructable can not be in the body mods group because is has nothing to deal with human body multilation have a nice day.

My boyfriend has pants just like these, Camo based too. Great instructable! Sweet idea with the double-sided fusible : D I need to do some patching now. Well, I only need to patch one thing, but patches are cool ;.