How to setup internet on the wii
Doing so will take you to the Wii home screen, signifying that your setup is complete. Depending on your Wii, a video displaying how to use your Wii may begin playing. Part 3. Select Wii and press A. This option is in the bottom-left corner of the screen.
Doing so prompts a pop-up menu. Select Wii Options and press A. It's an option in the pop-up menu. This will open the Wii Options page. Scroll right, then select Sensor Bar and press A. Scrolling right takes you to the second page of the Wii Options screen, and the Sensor Bar option opens your Wii's sensor bar settings. Select Position and press A. Doing so opens the Position menu. Skip this step if you don't want to reset the position you set during the Wii setup.
Select a position. Select Confirm and press A. It's at the bottom of the screen. This will fine-tune your sensor based on its position. Adjust your sensor bar's sensitivity. This will confirm your decision and return you to the Sensor Bar page. Part 4. Exit the Sensor Bar page. Select Back and press A to return to page two of the Options page. If you have an Ethernet USB adapter that you bought from Nintendo, you can plug it into the back of your console and then plug an Ethernet cable from your router into the adapter.
Select Internet and press A. This will open the Internet settings. Select Connection Settings and press A. This will display a list of three connections. If the Wii has never been connected to the internet, all of the settings will say "None" next to the Connection number. Select an unused connection and press A. Select Wireless and press A. Doing so will take you to the wireless network page. Select Search for an Access Point and press A. This will bring up a list of the current available networks.
Select a network and press A. This will bring up the connection's page. If the connection is public, selecting the network will prompt your Wii to connect to it automatically. Enter your network's password. If your network is password-protected, enter the password and press A. Update your Wii. Once you connect to either your wired or wireless network, you will be prompted to update your system. These updates can improve system functionality, and are required if you are playing online.
Do not update your system if it is modded , or you will lose access to your Homebrew channel. Add games and channels. After updating your system, you will be connected to the internet every time the Wii is turned on.
You can then add games and channels from the Wii store. Games will cost money to purchase, but most channels can be downloaded for free some require a separate subscription to use.
You can access the shop from the Wii Channels screen. Part 5. Insert the game you want to play. If there's nothing in your disc tray, you can insert the game into the disc drive to load it. Inserting the disc will open the game's channel, allowing you to start it by pressing the button on your screen. Make sure that you insert the disc the correct direction, with the label facing up.
You can also download games from the Wii store and they will show up as channels in your Channel menu. Use the Wiimote to play. Depending on the game, you may be asked to swing your controller around to play the game.
Make sure you have plenty of room to move, and that you won't bump into anyone or anything. Play a GameCube game. If you want to play a GameCube game in an RVL Wii, you will need to use a GameCube controller, and plug it into one of the ports on the top vertical or left side horizontal of the Wii. You will need to open a flap to access the ports. You'll insert the GameCube game like you would a regular Wii game.
Although the discs are smaller, they can be inserted into any part of the disc loader. If there is no sensor bar, the cursor will not work. You need to set up your sensor bar. Not Helpful 5 Helpful The Wii balance board connects just like a Wii remote. Insert its batteries, press the power button on the board, and it should connect as Wii remote 4. The first time you connect it, you may need to hold the small red reset buttons one in the board's battery compartment, the other behind the Wii's SD card slot cover simultaneously.
Not Helpful 2 Helpful 8. The Mii channel comes preloaded on every Wii. It is not used to play games; it is merely where you create characters, "miis" that can be used in many games. Not Helpful 2 Helpful I don't see a yellow plug-in for the Wii cables on the back of my TV. Any suggestions? The bank of plug-ins may be hidden behind a trap door on the back of your TV. Not Helpful 7 Helpful Abbey M. Log in Social login does not work in incognito and private browsers.
Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great.
By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need. Related Articles. Author Info Last Updated: June 3, Method 1. Ensure that your network is properly set up. You will need to be properly broadcasting a signal in order to connect the Wii to the network. Refer to your router or modem's instructions in order to properly set up your network. If you can connect to your network with other wireless devices, then you should have no issues connecting your Wii.
No special adjustments need to be made to the wireless network to accommodate it. If you don't have a wireless router, you can attach the Nintendo USB Wi-Fi adapter to your computer to make a specialized access point. Use the Wii Remote to select the "Wii" button. This round button will be located in the bottom left of the Wii Channels screen. Click on the arrow on the right side of the screen to scroll to the next page of options.
Choose "Internet" from the System Settings. From the Internet options, select "Connection Settings. Select the "Connection 1: None.
After detecting a network, a screen will open asking you to select your access point. Press OK to continue. Select your network. You should see the name of your network appear along with the strength of the connection. If your network has a password, a box will open asking you to enter it. Enter the password and select OK. If your access point does not show up on the list, be sure that your Wii is within range of the router, and that your network is configured correctly.
However, the Belkin Privacy Policy referenced herein is subject to change in the manner described in that document. Belkin may provide translations of this Agreement as a convenience to users.
However, in the event of a conflict or inconsistency between the English and any non-English versions, the English version of this Agreement shall govern, to the extent not prohibited by local law in your jurisdiction. Any suppliers of Belkin shall be direct and intended third-party beneficiaries of this Agreement, including without limitation with respect to the disclaimers of warranties and limitations on liability set forth herein.
Other than as set forth in the preceding sentence, a person or entity who is not a party to this Agreement shall not have any right to enforce any term of this Agreement. No failure or delay in exercising any right or remedy shall operate as a waiver of any such or any other right or remedy. The language of this Agreement shall not be construed strictly for or against either party, regardless of who drafted such language or was principally responsible for drafting it.
The rights and obligations under this Agreement are not assignable by you, and any attempted assignment shall be void and without effect. This Agreement shall bind and inure to the benefit of the parties and their successors and permitted assigns. You have the right to opt-out of this mandatory arbitration provision. If you opt-out, you will retain your right to file a lawsuit.
If you do not opt-out, you will have agreed to the mandatory arbitration set forth below. In order to opt out of mandatory arbitration, you must i mail written notification to Belkin International, Inc.
In either case, such written notification must include your name, address, and a clear statement that you do not wish to resolve disputes with Belkin through arbitration. Any opt-out request received after the Opt-Out Deadline will not be valid and you must pursue your Dispute in arbitration or, if the dispute qualifies, in small claims court.
If you are located outside of the United States, or if Section 17 does not apply to you or is otherwise unenforceable as adjudicated by a court of competent jurisdiction, then Section 18 applies to you:. The courts in some countries or jurisdictions will not apply California law to some types of disputes. The courts in some countries or jurisdictions will not allow for dispute resolution by arbitration or waiver of classwide claims by you.
If you are a resident of one of those countries or jurisdictions, any action arising out of or relating to this Agreement may be brought exclusively in the appropriate state or federal court in Los Angeles, California, and Belkin and you irrevocably consent to the jurisdiction of such courts and venue in Los Angeles, California. However, if you are a consumer and you live in a country where Belkin markets or distributes the Software, local law may require that certain consumer protection laws of your country of residence apply to some sections of this Agreement.
In addition, Belkin may seek injunctive relief in any court having jurisdiction to protect its intellectual property rights. If you are a natural person who resides in a country in the European Union, the laws of the member state in which you are a resident shall apply to this Agreement and any disputes potentially arising in connection thereto.
The courts of the member state in which you reside shall have non-exclusive jurisdiction over any such dispute. Residents of countries in the European Union may also bring any such dispute before a local consumer dispute resolution body, if any such body is constituted under the laws of the country in which you reside. Otherwise if you are located in Europe and are not a natural person, the laws of the United Kingdom shall apply to all matters arising from or relating to this Agreement without reference to its choice of law provisions and all disputes related thereto are dealt exclusively by the competent courts of the United Kingdom.
Both Belkin and you acknowledge that i this Agreement is concluded between Belkin and you only, and not with Apple, Inc. This Agreement does not provide for usage rules for the App that conflicts with the App Store Terms of Service as of the date you entered into this Agreement, and you acknowledge that you have had the opportunity to review the App Store Terms of Service.
Scope of License : The license granted to you for the App is limited to a non-transferable license to use the App on any Apple-branded products that you own or control and as permitted by the Usage Rules set forth in the App Store Terms of Service, except that such App may be accessed, acquired and used by other accounts associated with you via family sharing or volume purchasing.
Maintenance and Support. Belkin is solely responsible for providing any maintenance and support services with respect to the App as required under applicable law. Both Belkin and you acknowledge that Apple has no obligation whatsoever to furnish any maintenance and support services with respect to the App. Warranty : Belkin is solely responsible for the warranty in this Agreement, whether express or implied by law, to the extent not effectively disclaimed.
In the event of any failure of the App to conform to any applicable warranty, you may notify Apple, and Apple will refund the purchase price for the App to you. Product Claims. Intellectual Property Rights. Third Party Terms of Agreement. You must comply with any applicable third-party terms of agreement when using the App, such as your wireless data service agreement. Third Party Beneficiary. Belkin and you acknowledge and agree that Apple and its subsidiaries are third party beneficiaries of this Agreement and that, upon your acceptance of the terms and conditions of this Agreement, Apple will have the right and will be deemed to have accepted the right to enforce this Agreement against you as a third party beneficiary.
If you have a question about your Product or Software or experience a problem with it, please go to the following websites for information on how to contact Belkin in your area:. Belkin, Linksys, Wemo and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.
Tip: For priority service, provide us with a few details before you call by clicking the "Get Started" link below. Post your question to Twitter anytime. Share the Article:. Before you begin, go through the following checklist: Ensure that your router is connected to the Internet and SSID broadcast has been set to Enabled.
Check the network mode of your router.
0コメント