Windows boot manager windows failed to start status 0xc00000e9

Meanwhile, please also check other USB devices on the computer, you can disconnect them and try to start the computer again. Already tried that, the thing is completely dead Yes, sometimes it shows a HD but not all the time. I checked all the cables. So, all my data is lost. Luckely I have a backup of march m but that is far away. Of course, I learned a lot of this.. But it is too late for 4 months Cameron19 is the answer that worked for me, or at least showed me my hard drive is now just a nice paper weight.

Press F10 at startup and select Primary Hard disk self test. My computer is only a few months old and the hard drive failed. I think it is the following problem,. Gradual disk failure or partial failure may present in the following ways:. I re-installed the OS when it happened on the first two laptops to get around the problem.

When it happened on the last laptop I used the following procedure and recovered from the problem:. Let the recovery disk attempt to perform a startup repair, it it succeeds you are in luck and do not need to proceed any farther. In my case, the startup repair failed with an error indicating that it could not save the startup options, an indication that there was some kind of disk error.

In my case running chkdsk was very slow and it ran overnight. In my case, this succeeded and was able to re-boot and have windows working again. I guess that an alternative would be to obtain the disk utilities from your hard drive manufacturer and use them to repair the disk corruption issues and then try the recovery disk to perform a startup repair. When it shut down, i start it again and it said :.

Windows Error Recovery. IF windows files have been damaged or configured incorrectly, Start up Repair can help diagnose and fix the problem. If power was interrupted during startup, choose Start Windows Normally. This error can be caused by unplugging a removable stroage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.

If you continue to receive this error message, contac the hardware manufacturer. I had the same problem , but it's gone by changing the RAM so try it , and I hope it will help you as well. But you only have the case with the above named stop error that you get when you had turned off your ide hard disc in your bios under "boot disks" or sequence mine is a phoenix-award bios.

That i found. Because it's common, there are many reasons why the error might appear:. If all the steps above do not solve the issue, try some swap tests with motherboard or other hardware.

Contact support. Characters remaining: We appreciate all feedback, but cannot reply or give product support. Please do not enter contact information.

If you require a response, contact support. Step 3: Open File Explorer. Right-click on This PC and choose Properties. Step 4: Click Control Panel Home at upper the left corner of the pop-up window.

Then, select Programs and Features in the next pop-up window. Step 5: Click View installed updates on the program uninstalling interface. Windows 10 not booting is a common issue that can occur after Windows update or reset. We show you possible solutions in this post. A device driver is a special program that allows computers and devices to communicate.

The operating system can only control the operation of the hardware device through this interface. Ifdrivers of hard drivesare not properly installed, they will not work properly. So, you can try updating disk drivers to fix 0xce9 Windows This method is available when users can boot in Safe Mode. You can refer to the following tutorial. Step 2: Expand Disk drivers directory and right-click on these hard drive drivers one by one to select Update driver.

Step 3: Select Search automatically for updated driver software in the pop-up window. System restore can revert your computer's state to that of a previous point in time with a restore point created before. Restore points contain Windows system files, installed applications, Windows Registry, and system settings. You can use it to delete problematic changes you have made to your computer. This feature won't affect your personal files, so it won't cause data loss. If you find your data is lost after system restore, it must be caused by Windows errors.

As mentioned above, error 0xce9 may be caused by the loose or damaged connection of removable storage devices. So, you should make sure the storage devices are properly connected to your PC. Then, you can see the number of hard drives detected by your PC. Step 3: Remove the internal hard drives and plug them in correctly if the hard drives can't be detected by your PC. If the hard drives still can't be detected by your PC after you reconnect them, you should check whether there are problems with cables or the hard drives.

If there is a problem with your hard drives, but they are still detected by your computer, you can get them repaired through method 6 to 7. If your computer can't detect the hard drive, you should send it to a data recovery lab to get your data back. MBR Master Boot Record is the first sector on the hard drive accessed by a computer in booting process. Now whenever I try to run my computer with or without the hardrive, tried both ways it gives me the same errors.

When I try to use the System Repair it says: Windows is loading files I've had this problem for about a month now. Originally it would just suddenly shut down and then I could start it normally. But then the next time it would have the error pages and then if I left it alone for a few days it would boot back up normally.

Was this reply helpful?